ODA EX 100-12, User Manual

Page: 81 / 94

FACT:LAST-STA {DIS|SAF|FUL}
When you turn on the power supply, you can select the default state of output DC power.
> DIS When this mode is selected , boot the power supply to original default value.
> SAF When you turn on the power supply, appears "OUTPUT OFF" display.
But if you press the "OUTPUT" key, recall the last state voltage/current value.
> FUL Recall the state before you turn off fully.
Set the safety mode
FACT:LAST-STA?
Confirm the Last-state value.
Return value "DISABLE"
"SAFETY"
"FULLY"
ex)fact:last-sta?
return value "SAFETY"
FACT:AUTO-CUR {DIS|ENA}
If the power supply doesn't receive any operation by using front-panel within a certain period of time,
the power supply's cursor location go down to minimum changing unit automatically when you set
the "AUTO CURSOR MV" mode is enable.
> DIS Disable "AUTO CURSOR MV" mode.
> ENA Enable "AUTO CURSOR MV" mode.
Disable "AUTO CURSOR MV" mode.
FACT:AUTO-CUR?
Confirm the auto cursor value.
Return value "0" Disable state
"1" Enable state
ex)fact:auto-cur?
return value "1"
FACT:AUTO-LOC {DIS|ENA}
If the power supply doesn't receive any operation by using front-panel within a certain period of time,
the power supply becomes the key lock state automatically when you set the "AUTO KEY LOCK" mode
is enable.
> DIS Disable "AUTO KEY LOCK" mode.
> ENA Enable "AUTO KEY LOCK" mode.
ex) fact:auto-loc ena Set the auto lock function.
FACT:AUTO-LOC?
Confirm auto key lock value.
Return value "0" Disable state
"1" Enable state
return value "1"
ex) fact:auto-cur ena
ex)fact:auto-loc?
- 82 -
ex) fact:last-sta saf