ODA EX 100-12, User Manual

Page: 12 / 94

1-5. Check Before Power On
Check Output terminals
▌
Check the rear panel outputs for voltage sensing and rear main outputs as below.
<Figure 1-1>
WARNING
Floating the power supply output more than ±60 Vdc from the chassis presents an electric shock hazard
to the operator. Do not float the outputs more than ±60 Vdc when metal shorting material or wire
without insulation are used to connect the (+) output to the (+) sense and the (-) output to the
(-) sense terminals.
WARNING
Outputs can be floated to maximum of ±240 Vdc provided that the metal shorting wire without insulation
are either replaced with insulated conductors or they are removed from the terminals so there is no
operator access to the output conductors without insulation. All field wiring insulation must be adequate
for the voltage present.
- 13 -
<Figure 1-2>