ODA EX 100-12, User Manual

Page: 18 / 94

1. POWER switch
The power supply is turned on or off by this switch. It is adopted by following power supply's capacity.
2. Ventilation slit.
Air flow flows from front ventilation slit to rear ventilation slit compulsorily.
3. 16Character, one line LCD Display.
Voltage/current and , all kinds menu/message displayed.
4. Error Lamp
Error occurs, LED is lit. After checked all errors, LED is turned off.
5. Limit Display Lamp
When the instrument is under the setting of Volt/Curr, LED is lit. If the device is output on state
LED is turned off.
6. Key Lock Lamp
If Key lock lamp is turned on, front panel keys are not working.
7. Remote Interface Lamp
When received the remote control signal from PC, PLC and etc, it lights and automatically,
front panel keys are under "Key Lock" state.
8. CV Mode Lamp
The power supply is in constant voltage mode
9. CC Mode Lamp
The power supply is in constant current mode
10. Voltage Encoder Knob
Adjusts the output voltage, the over-voltage protection level, the under-voltage limit
and numeric value changing of other menu.
11. Current Encoder Knob
Adjusts the output current, the over-current protection level, the under-current limit
and numeric value changing of other menu.
- 19 -