Chapter 1 Using the Operator Panel
1-52
Press the or key repeatedly until
Page Set >
appears.
Press the key.
Press the or key repeatedly until
>CR Action
appears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key repeatedly until desired car-
riage-return action appears.
CR only
A carriage-return is performed.
(default)
CR and LF
A carriage-return and linefeed are
performed.
Ignore CR
The carriage-return code is ignored.
When the desired action is displayed, press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
Turning this
On
increases the maximum number of charac-
ters that can be printed in a line for A4 page (78 characters at
10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is effective only in PCL 6 emulation.
Press the
MENU
key.
Press the or key repeatedly until
Page Set >
appears.
Press the key.
Press the or key repeatedly until
>Wide A4
ap-
pears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Select
On
or
Off
using the or key.
Press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
You can display the total number of pages printed by your
printer for confirmation whenever necessary. The total num-
ber of printed pages can also be checked on the status page.
Moreover, for proper maintenance scheduling, it will be nec-
essary to reset the toner counter using this menu each time a
new toner container is installed.
This procedure only displays the total number of printed
pages. The number cannot be changed.
Press the
MENU
key.
Press the or key repeatedly until
Life
Counters >
appears.
Press the key.
Press the or key until
>Total Print
appears,
followed by the current total printed pages
(
0123456
in this example).
Press the
MENU
key. The message display returns to
Ready
.
Page Set >
>CR Action
CR only
>CR Action
? CR only
Setting Wide A4
Page Set >
2
3
4
5
6
7
8
1
2
3
4
>Wide A4
Off
>Wide A4
? Off
Verifying Total Printed Pages
Life Counters >
>Total Print
0123456
5
6
7
8
1
2
3
4
5
