Oce WP20, Operation Manual

Page: 29 / 110

Chapter 1 Using the Operator Panel
1-19
Press the key.
Press the or key repeatedly until
>MP Tray
Type
appears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key to display the desired MP tray
paper type. The display changes as shown below.
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
Custom1(
to
8)
*
* You can define and register a desired paper type to the
printer in advance. See
Customizing Paper Type
below for details.
When the desired MP tray paper type is displayed,
press the
ENTER
key.
Press the
MENU
key and the message display re-
turns to
Ready
.
Customizing Paper Type
The following describes the procedure used to set a user-de-
fined paper type for the printer. Eight custom user settings
may be registered. Once registered, any of these may be
called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see
Setting the
Paper Weight
below and
Setting the Duplex Path on page 1-
20
). To reset the customized settings, see
Resetting the Type
Adjust on page 1-21
.
Press the
MENU
key.
Press the or key repeatedly until
Paper
Handling >
appears.
Press the key.
Press the or key repeatedly until
>Type
Adjust >
appears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key to display the desired paper
type. The display changes as shown below.
Custom1(
to
8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
When the paper type to be customized is displayed,
press the
ENTER
key.
Press the key and proceed to Setting the Paper
Weight below and Setting the Duplex Path on
page 1-20 .
Paper Handling >
>MP Tray Type
Plain
>MP Tray Type
? Plain
3
4
5
6
7
8
Paper Handling >
>Type Adjust >
Custom 1
>Type Adjust
? Custom 1
1
2
3
4
5
6
7
8