Chapter 1 Using the Operator Panel
1-15
This section explains the following topics:
•Setting Paper Size
•Setting Paper Type
•Adjusting Print Density
•Setting MP Tray Mode
•Selecting Paper Source
•Setting Duplex Printing
•Overriding A4 and Letter Size Difference
Set the paper sizes according to the sizes of paper to be set in
the paper cassette and the MP tray. This setting is made
with the paper size dial for the paper cassette and the opera-
tor panel for the MP tray, respectively.
If they do not match, printing will not be made on the correct
size paper when automatic paper size selection is made by
the application software (printer driver).
Setting the Paper Cassette
In addition to the standard A5 , B5 , A4
(long-edge
feed), A4R (short-edge feed), B4 , and A3 size paper,
paper of non-standard sizes (OTHER) can be fed into the pa-
per cassette of this printer
For details about the adjustment of the paper guides and pa-
per stopper inside the paper cassette, see the Installation
Guide supplied with the printer.
If the paper size dial is not properly adjusted to the actual paper
size, printer trouble such as paper jam may occur.
Pull out the paper cassette from the printer and turn
the paper size dial to the paper size you set.
Adjust the paper guides and paper stopper inside
the paper cassette to the size of the paper to be used
and load the paper into the cassette. Replace the
cassette into the printer.
Standard paper sizes are automatically detected by
the printer. For non-standard paper sizes, see the
following section Setting Non-Standard Paper Size .
Setting Non-Standard Paper Size
Use the following procedures to set a paper size for non-stan-
dard size paper from the operator panel.
Press the
MENU
key.
Press the or key repeatedly until
Paper
Handling >
appears.
Press the key.
Press the or key repeatedly until
>Cassette
Size
>
appears. If option paper feeders are added,
Cassette1 Size
will appear for the standard pa-
per cassette and
Cassette2 Size
to
Cassette5
Size
will appear for the option paper feeders.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key to select desired paper size.
The following paper size are displayed.
A4
Executive
Letter-R
Letter
Legal
Ledger
A3
B4
Custom
C4
Oficio II
Folio
8K
16K
C5
A5
B5
ISO B5
A4-R
Press the
ENTER
key. Set the unit of measurement
as described in the next section if you have selected
Custom
.
Paper Handling
Setting the Paper Size
NOTE
1
2
Paper Handling >
>Cassette Size >
Custom
>Cassette Size
? Custom
1
2
3
4
5
6
7
