Chapter 1 Using the Operator Panel
1-16
Selecting Paper Size Unit for the Paper Cassette
Set the paper size unit as described below when
Custom
is se-
lected.
When the paper size is set to
Custom
, press the
key.
>>Unit
appears and the unit currently set is dis-
played. You can select from
mm
and
inch
. The de-
fault setting is
mm
.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key to select
mm
or
inch
.
Press the
ENTER
key.
Entering the Width and Length
Then, use the following procedure to set the paper size when
the paper size is set to
Custom
.
When the unit of measurement is set, press the
key.
>>X Dimension
appears (the paper width set-
ting).
Press the
ENTER
key. A blinking cursor (
_
) appears.
Press the or key to increase or decrease the
value of the figure where the cursor is blinking and
display the desired width. The width can be set be-
tween 148 and 297 mm (5.83 to 11.69 inches). You
can use the and keys to move the cursor right
and left.
Display the paper width and press the
ENTER
key.
When the width is set, press the key.
>>Y Dimen-
sion
appears (the paper length setting).
Press the
ENTER
key. A blinking cursor (
_
) appears.
Set the desired length in the same way as you set
the paper width. The length can be set between 210
and 432 mm (8.27 to 17.01 inches).
Display the paper length and press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
>Cassette Size >
Custom
>>Unit
mm
>>Unit
? mm
1
2
3
4
5
>>X Dimension
297 mm
>>X Dimension
297 mm
>>Y Dimension
432 mm
>>Y Dimension
432 mm
>>Y Dimension
432 mm
1
2
3
4
5
6
7
8
9
