Chapter 1 Using the Operator Panel
1-38
Press the or key to display the desired user
name (
Arlen
, in this example).
Press the
ENTER
key. The user name and the job
name (
Agenda
, in this example) entered in the
printer driver appear with a blinking question mark
(
?
).
Press the or key to display the desired job title.
Press the
ENTER
key. The ID input line appears.
Enter the four-digit access code entered in the print-
er driver and press the
ENTER
key. To enter the ID,
press the or key to move the cursor to the num-
ber to be changed and then enter the correct number
by pressing the or key.
In printing a stored job, the access code must be en-
tered in this step only when it has been set on the
printer driver.
You can set the number of copies to be printed. To
increase the copy count, press the key; to decrease
the copy count, press the key.
Press the
ENTER
key to finalize the copy count. The
printer prints the specified number of copies for the
job.
Deleting a Private/Stored Job
Follow steps 1 through 8 in the above section.
When the title of the job to be printed is displayed
(
Agenda
, in this example), press the
ENTER
key. En-
ter the four-digit access code entered in the printer
driver and press the
ENTER
key.
Press the key repeatedly until
Delete
appears
for the number of copies.
Press the
ENTER
key. The private job is deleted
from the hard disk.
Printing a Code Job
KM-NET Job Manager
Install the KM-NET Job Manager software from the
Kyocera
Mita Digital Library
CD-ROM supplied with the printer. To
do this, from the CD-ROM
Main Menu
, select
Printer Utilities
>
Install KM-NET Job Manager
.
Browse through Windows
Start
>
Programs
>
KYO-
CERA MITA
>
KM-Net
>
Job Manager
.
Enter the password for the software.
Job Manager
will start.
Click the
Add printer
icon (below). Select the
Local
or
Network
port.
If you use the local parallel port to connect to the printer, make
sure that the printer driver is set to print to a local port. To check
this out, click the Details tab of the printer Properties, and note
the Print to the following port setting.
Follow the wizard until the
Select printer
dialog box
is reached. When the printer is found in the
Printer
List
, click (highlight) it, then
Finish
.
>Private/Stored
?Harold
>Private/Stored
?Arlen
>Arlen
?Agenda
>Agenda
ID 0000
>Agenda
Copies 001
6
7
8
9
10
11
1
2
>Agenda
Copies 001
>Agenda
Delete
NOTE
3
4
1
2
3
Add printer
icon
4
