Chapter 1 Using the Operator Panel
1-36
This mode enables you to print the requested number of cop-
ies of a job, simultaneously storing the job on the hard disk.
When additional copies are required, you can reprint the re-
quired number of copies from the printer operator panel. To
print a job as a quick copy job, see
Printer Driver Guide
.
The default number of print jobs that can be stored on the
hard disk is 32. This value can be increased to up to 50 from
the e-MPS Configuration menu. For details, see
Maximum Number of Quick Copy/Proof-and-Hold Jobs on
. When the number of jobs reaches the limit, the old-
est job will be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Printing Additional Copies Using Quick Copy
To print additional copies of a job stored in the printer:
Press the
MENU
key.
Press the or key repeatedly until
e-MPS >
ap-
pears.
Press the key.
Press the or key repeatedly until
>Quick
Copy
appears followed by the user name (
Harold
, in
this example). The user name is assigned at printing
using the printer driver.
Press the
ENTER
key. A blinking question mark (
?
)
appears before the user name.
Press the or key to display the desired user
name,
Arlen
, in this example.
Press the
ENTER
key. The job name entered in the
printer driver (
Report
, in this example) appear with
a blinking question mark (
?
) before the letters.
Press the or key to scroll to the desired job ti-
tle.
Press the
ENTER
key. The number of copies to be
printed can be set. To increase the copy count, press
the key; to decrease the copy count, press the
key.
Press the
ENTER
key to finalize the copy count. The
printer prints the specified number of copies for the
job.
Deleting a Quick Copy Job
All quick copy jobs are automatically deleted when the print-
er is turned off. If you desire to explicitly delete a stored quick
copy job, proceed as follows:
Follow steps 1 through 8 in the above section to let
the title of the job to be deleted displayed.
When the title of the job to be deleted is displayed,
e.g. Report, below, press the
ENTER
key. The cursor
below the copy count starts to blink.
Press the key repeatedly until
Delete
appears
below the title.
Press the
ENTER
key. The stored quick copy job is de-
leted.
Using Quick Copy
e-MPS >
>Quick Copy
Harold
>Quick Copy
?Harold
>Quick Copy
?Arlen
1
2
3
4
5
6
7
>Arlen
?Report
>Report
Copies 001
>Report
Copies 001
>Report
Delete
8
9
10
1
2
3
4
