Oce im5530, Operator'S Manual

Page: 46 / 360

42
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Océ-recommended paper / Handling and storing paper
Recommended paper
To make copies with a fine image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
* Only Océ-recommended OHP film should be used. Using any other film may cause a malfunction.
Handling and storing paper
Pay attention to the following points:
•
Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
• Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this
may cause paper misfeeds.
• Paper should be wrapped in its wrapping and stored in a damp-free place.
• To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper type Océ recommendations/Manufacturer Mode
Plain paper TIDAL/Hammermill (20 lb. Bond) PLAIN
Thick Laser/Hammermill (24 lb. Bond) THICK1
(32 lb. Bond) THICK2
Exact Index/WAUSAU (90 lb. Index) THICK2
(110 lb. Index) THICK3
Tab paper Copytabs/Blanks USA TAB
Tracing paper Tracing Paper/Ostrich International (20 lb. Bond only) PLAIN
Sticker labels 5165/Avery THICK3
OHP film
*
PP2500L/3M OHP FILM
X-10.0/Folex OHP FILM