manualshive.com logo in svg

Oce im5530, Operator'S Manual, Page: 314 / 360

Share
Download
Oce im5530 Operator'S Manual Download Page 314

310

10.WHEN THIS MESSAGE APPEARS

10

1. “Toner low”

This message appears to notify you that the toner cartridge is running out of toner. Approx. 5000 sheets of 
paper can be copied until the toner cartridge becomes empty after this message has appeared. Prepare a 
new toner cartridge before the toner runs out.
•

Replace the toner cartridge after “Install new Black toner cartridge” has appeared and the toner cover 
symbol blinks. (

 

 P.284 “Toner cover symbol”)

If this message does not disappear after the new cartridge has been installed, perform the following proce-
dure to delete the message.

2

Press the [USER] button.

1

Press the [USER FUNCTION] button.

Summary of Contents for im5530









































































































































































































































































































































































Reviews:

No comments