Oce im5530 Page 136 Operator'S Manual Download

Page: 136 / 360

132

5.USING THE EDITING FUNCTIONS

3.BOOK CENTER ERASE (Cont.)

Adjust the width by pressing the [2 mm] or [50 mm] button, and then
press the [ENTER] button.

• The default width of the erase margin is 10 mm (0.393").
• Select other copy modes as required.

Place a book original on the original glass. Align its center with the
yellow guide line near the center of the original glass.

Do not place heavy objects (9 lb. or more) on the original glass and do not press on it with force. Breaking the
glass could injure you.

Press the [START] button.

Summary of Contents for im5530









































































































































































































































































































































































Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands

Oce im5530, Operator'S Manual

Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands