Oce im5530 Page 334 Operator'S Manual Download

Page: 334 / 360

330

10.WHEN THIS MESSAGE APPEARS

11.“Check paper size setting on control panel for drawer N” (Cont.)

See the size indication on the touch panel to check the paper size reg-
istered for the drawer mentioned in the message.

Place the paper, whose size is same as the one you have checked at
step 5, in the drawer mentioned in the message.

P.39 “4.Setting Copy Paper”

The job is resumed.

• If you change the paper size again after the completion of the job, check that the paper size placed in the

drawer is the same as the one registered in the equipment for the corresponding drawer.

Pull out the drawer mentioned in the
message. Then remove all paper the in it.

Close the drawer and then turn the power
ON.

Summary of Contents for im5530









































































































































































































































































































































































Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands

Oce im5530, Operator'S Manual

Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands