background image

7

Supplies / Parts

Dependability

Genuine Océ supplies are subjected to the strictest of inspections so that every supply you receive will 
perform at optimal levels.

High Productivity

Genuine Océ supplies are created to meet the demands of our competitive world and provide high-
speed reliable copies when you need them.

Stable Image Quality

Genuine Océ supplies are designed to provide consistently stable image output.

Copier Friendly Supplies

Genuine Océ supplies are designed to help to keep the copier and all its parts in trouble-free working 
order.
Reduction of machine wear is due to Océ’s intimate knowledge of the copier’s characteristics ensuring 
the highest standard of care.

Perfectly Suited Supplies

From the beginning Océ supplies and machines were made for each other. Whenever Océ designs a 
new machine, it also designs a new toner that is made just for that machine. By using genuine Océ 
supplies with Océ copiers, you are guaranteed optimum performance.

Toner

Optimum image Quality

Océ toner is manufactured using ultra-fine quality materials under precisely controlled conditions to 
ensure that your Océ copiers will continually generate sharp high-quality images.

Cost Advantage

Genuine Océ toner provides value. Only the proper amount of toner is used during the reproduction 
process, thereby enabling the machine to continue to operate until all the toner has been used. In this 
way you get the full value from each cartridge used.

Environmental Harmony

Genuine Océ toner is manufactured with the environment in mind. To protect our planet for the benefit 
of future generations, we use embossed or plastic labels making our toner cartridges fully recyclable. 
In addition, dust and ozone levels have been reduced to improve the working environment.

User Friendly

Before approving our toners for sale, we test them to be sure that they pass the strictest of health stan-
dards. This takes all the worry out of handling the toner.

General

Service and Support Benefits

Océ’s Service technicians are certified to keep your copier performing at optimum levels.To ensure 
continuous image quality, utilize an authorized Océ Service provider to care for and perform periodical 
maintenance on your copier.

Summary of Contents for im5530









































































































































































































































































































































































Reviews: