Oce im5530 Page 323 Operator'S Manual Download

Page: 323 / 360

319

6. “Examine stapler in the saddle stitch unit”

This message appears when the staples in the saddle stitch unit (optional) are jammed. To remove them,
follow the procedure below.

Open the lower cover of the Saddle Stitch
Finisher.

Pull out the saddle stitch unit slowly.

Pull the handle of the stapler of the sad-
dle stitch unit to release the lock. And
then rotate the stapler approx. 60º clock-
wise.

• The stapler is locked and fixed when it comes to a near-horizon-

tal position.

Summary of Contents for im5530









































































































































































































































































































































































Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands

Oce im5530, Operator'S Manual

Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands