Oce im5530 Page 225 Operator'S Manual Download

Page: 225 / 360

221

Select the desired user group, and then press the [ENTER] button.

• If the desired user group is not displayed, press the [Prev] or [Next] button to switch the menu.

Key in the password (5 digits) for the selected user group, and then
press the [ENTER] button.

• If no password was set when the user group was registered, skip to step 6.

The corresponding buttons of the template registered in the user
group are displayed. Press the blank key, and then press the [SAVE]
button.

Summary of Contents for im5530









































































































































































































































































































































































Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands

Oce im5530, Operator'S Manual

Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands