Oce im5530, Operator'S Manual

Page: 107 / 360

103
3
Hole punch mode (optional)
When the Hole Punch Unit (optional) is installed to the Finisher or the Saddle Stitch Finisher (both
optional), you can punch holes in the copies.
•
The available copy paper sizes for this mode are LD, LG, LT, LT-R and COMP.
• The paper weight applicable for this mode is 17 lb. Bond to 140 lb. Index.
• Special paper such as OHP films or sticker label cannot be used for hole punching.
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. ( P.69 “6.Bypass Copying”)
2
Place the original(s).
3
Press the finisher button on the basic menu.
4
Press the [HOLE PUNCH] button.
• Set other copy modes as required.
5
Press the [START] button.
When the Inserter Unit (optional) is installed, you can punch holes without the need to go through any copying
operation by setting paper on the unit.