Chapter 5 : Handling the printer
88
AP-75037, Rev. 1.1, 24/04/2006
5.4 MENU SETUP ON THE OPERATION PANEL
This section describes how to set the menu settings on the operation panel, and setup items.
Follow the 2 steps below to set the menu settings.
Step 1 :
Make sure that the operation panel is in normal mode.
1
→
Ready to print
2
→
Heaters Cleaning
←
3
4
→
Cut&Feed Lever
Up
←
5
6
→
User1 xxxm
←
7
Step 2 :
Press the [MENU
▲
] or [MENU
▼
] key.
•
The screen shows following menu :
Current Setup Menu
→
* SetupMenu *
F1
→
Ink Status
OriginSet
←
F2
F3
→
TestPrint MediaSet
←
F4
(1/7)
End of the procedure
Notes :
•
For functions of the operation panel with the setup menu displayed, refer to the
following :
o
5.5 Operating from the operation panel (page 145)
o
5.4.1 Setup menu (page 89)
•
For the structure of the setup menu, refer to the following :
o
5.4.1.2 Setup menu structure (page 90)
•
When page numbers of the setup menu have been displayed on the operation
panel, you can change the sequence by pressing the [MENU
↑
] or [MENU
↓
] key.
Each table shows the factory default settings.
