Chapter 3 : Setting up the unit
33
AP-75037, Rev. 1.1, 24/04/2006
3.3.2 Mounting the main unit to the stand
The procedure below describes how to mount the main unit to the stand, assembled in the previous chapter.
Parts and Tools :
No°
Description
Quantity
1 Stand
1
2 Main
unit
1
3
Hexagon socket head cap screw (M6 x 16)
8
4
Hexagon wrench 5mm
1
Procedure (3 steps) :
•
Place the stand with its weight supports on the floor.
•
Lift up the main unit (2) with at least four persons by holding it by the handles (3) and place it on the
stand (1). See image below.
1 = Stand
2 = Main unit
3 = Handle
•
Tighten the hexagon socket head cap screws (1) to fix the stand as shown on the image below.
1 = Hexagon socket head cap screw (M6 x 16)
2 = Stand
3 = Main unit
