Chapter 5 : Handling the printer
86
AP-75037, Rev. 1.1, 24/04/2006
5.3.5 Distance adjustment
Depending on the thickness of media, the media feed amount will change. Printing results may show
following symptoms:
¾
Overlapped printing images
¾
White lines on printing image, etc
For above cases, adjust distance adjustment value using following procedures :
Step 1 :
Display Distance adjustment menu on the operation panel by following "Menu setup on the
operation panel".
¾
The following messages are displayed on the operation panel.
* Dist. Adj *
F1
→
Print 1
Change
F3
→
Print 2
Step 2 :
Select an item and press the [F1] or [F3] Key.
Setup items
Key
Parameters
Description
F1
Print 1
Perform printing by media feed compensation at ±
0.10% intervals of setup value from the current
parameter.
Dist. Adj.
F3
Print 2
Perform printing by media feed compensation at ±
0.02% intervals of setup value from the current
parameter for fine adjustment.
¾
The following messages are displayed on the operation panel.
¾
Print the information on the selected menu.
* Dist Adj *
Printing
→
CANCEL
