Chapter 2 : Product Overview
23
AP-75037, Rev. 1.1, 24/04/2006
2.4.3 Changing the printer status
2.4.3.1 Changing the status from normal to the setting menu display
Press either [MENU
Ç
] or [MENU
È
] on the operation panel when the printer is in normal status.
¾
The display of the operation panel changes to the Setting menu display.
Note :
•
Refer
to
5.4.1 Setup menu (page 89)
for details of the setting menu.
2.4.3.2 Changing the status from the setting menu display to normal
Execute one of the following actions when the printer is in the setting menu display to change the operation
panel display to normal one.
¾
Press the [CANCEL] key on the operation panel.
¾
Leave the printer 3 minutes (no printing) when the status is in the setting menu display.
Ready to print
Heaters
Cleaning
Cut&Feed
Lever
Up
User
1
xxxm
[MENU
↑
] or [MENU
↓
]
↓
↓
↑
↑
[CANCEL] or leave the printer as it is
for 3 minutes
*
SetupMenu
*
InkStatus
OriginSet
TestPrint
MediaSet
(1/7)
Note :
•
Refer
to
6.3.1 Status messages (page 167)
for details of displaying the printer
status.
