Chapter 5 : Handling the printer
123
AP-75037, Rev. 1.1, 24/04/2006
5.4.5.6 Print and wipe menu
To take care of possible condensation on the head nozzle plate, it is possible to wipe while printing.
*Prn
+
Wipe*
OFF – Low
+
OFF -
F2 , F4
→
ENTER
Setup items
Parameters
Description
OFF
No wiping during printing
High
After printing 10 passes, wiping cycle will be
performed.
Middle
After printing 16 passes, wiping cycle will be
performed.
Print and Wipe
Low
After printing 22 passes, wiping cycle will be
performed.
-
• [CANCEL] key: To shift to the previous menu.
Refer to
Setup menu
5.4.5.7 Smart top menu
This feature will take care of a feed of 5 centimetres before every print. To start printing on media which is
pre heated.
* SmartTop *
F1
→
Off ON
←
F2
-Off-
(1/1)
Setup items
Parameters
Description
Off
No media feed of 5 centimeters
Smart Top
ON
A media feed of 5 centimeters
-
• [CANCEL] key: to shift to the previous menu.
Refer to
Utility menu
5.4.5.8 Auto cleaning menu
Printer performs an automatic cleaning before or during printing. Or during an idle period of 1 hour of more.
* AutoClean *
F1
→
Waiting Printing
←
F2
F3
→
BeforePrint
(1/1)
Setup items
Parameters
Description
Waiting
To perform a little, normal, powerful cleaning while printer is idle
for 1, 2, 3, 4, 5, 6, 9, 12, 18, 24 hours.
Printing
To perform a little, normal, powerful cleaning after 5, 10, 15, 20,
30, 45, 60, 90, 120, 150,180 minutes of printing.
Auto Clean
Before Printing
To perform a little, normal, powerful cleaning before every job
-
• [CANCEL] key: to shift to the previous menu.
Refer to
Utility menu
