Chapter 4 : Preparing for a job
69
AP-75037, Rev. 1.1, 24/04/2006
4.8.3 Connecting the Centronics interface
The procedure for connecting the Centronics interface is explained below.
To connect the printer to your computer, follow the steps below.
Procedure (3 steps) :
Step 1 :
Turn off the printer and your computer.
Step 2 :
Plug the cable connector of the interface cable into the interface connector at the back of the
printer. Squeeze the wire clips together until they lock into place.
1 = Centronics interface connector
2 = Interface cable
Step 3 :
Plug the other end of the cable into the computer's port.
End of the connectiong procedure
Note :
•
Refer to your computer's manual for the procedure to connect your computer.
