Chapter 5 : Handling the printer
121
AP-75037, Rev. 1.1, 24/04/2006
5.4.5.2 ErrorDisplay menu
To set display method to the operation panel when a minor error occurred.
* ErrorDisp. *
F1
→
OFF ON
←
F2
Current parameter
→
- OFF -
(1/1)
Setup items
Parameters
Description
<Off> No
ErrorDisplay.
On
To perform ErrorDisplay.
ErrorDisplay
-
To shift to the previous menu.
Refer to
Utility menu
5.4.5.3 Media detection menu
When media has been initialized, to perform detection of width and edge of the media.
* Detection *
F1
→
Normal Off
←
F2
F3
→
TakeupRoll RollFeed
←
F4
Current parameter
→
- Normal -
(1/1)
Setup items
Parameters
Description
<Normal>
To perform media detection automatically.
OFF
No media detection.
Take-up mechanism
Use this setting if using the winding system and the
media is most right loaded.
RollFeed
Use this setting if using the winding system and the
media is center loaded.
media detect
-
•[CANCEL] key: to shift to the previous menu.
Refer to
Utility menu
Notes :
•
The default setting is ‘Rollfeed’ as a result of the standard UW/W 100 with your unit.
•
When setting "Take-up Mechanism" on the Media Detection menu, the following
limits are applied to the operation of the product.
•
For initial media, only the media width is detected.
•
Under normal conditions, media cannot be sent backward.
•
The media cannot be moved forward or backward from the Origin Setting menu.
•
The settings in the Media Cut menu are disabled, and the settings are changed to
"Off". Refer to
Media cut menu
