Chapter 3 : Setting up the unit
35
AP-75037, Rev. 1.1, 24/04/2006
3.3.5 Removing the protective packaging material
Caution :
•
Be careful not to pinch your fingers when opening and closing the front cover.
Caution :
•
Remove the head locker BEFORE powering on the printer !
Remove all protective packaging material according to the following procedure.
Procedure :
PART 1 : Removing tape and anti-rubbing materials (2 steps)
Step 1 :
Remove tape from all parts of the product.
Step 2 :
Remove the two anti-rubbing materials (1) on top of the main unit. (See image below)
1 = Anti-rubbing material
End of part 1
