Chapter 4 : Preparing for a job
64
AP-75037, Rev. 1.1, 24/04/2006
4.7.2 NozzleCheck
Purpose :
Use this function to check if there is any clogging of nozzles, missing dots or faint printing.
Notes and cautions :
Note :
•
If printing quality declines, or if missing dots are evident after the NozzleCheck, the
print heads need to be cleaned. Refer to perform head cleaning. After finishing the
head cleaning, perform the NozzleCheck again.
Note :
•
To print the nozzle check, see
4.7 Testprinting (page 62)
Caution :
•
Please wait at least 30 minutes before performing a nozzle check after loading ink.
This to allow the ink to settle in the print heads.
Below you’ll find a good and bad result of a nozzle check :
