Oce Arizona T220UV, User Manual

Page: 70 / 114

70 T220UV User Guide
Installing New blot Cloth
1.
Remove the old roll of blot cloth and discard.
2.
Remove the old empty cardboard core and save it for use in Step 4.
3.
Mount a new roll of blot cloth on the lower supports. Run the cloth up the back and over the top of the blot station.
4.
Mount the old cardboard core on the upper supports ensuring that the pins on the spindle engage properly with the notched
core.
5.
Remove the strip of backing tape from the start of the new roll and stick the new roll to the old core.
[20] Mounting the Old Cardboard Core
[20] Mounting the Old Cardboard Core
Note:
Make sure that you align the cloth material and not the plastic material at the start of the roll to the old core.
6.
Advance the new cloth by hand ensuring that there is no paper tape or loose fibers adhering to the cloth in the area where the
paper tape was stuck to the roll.
[21] Secure the New Blot Cloth
[21] Secure the New Blot Cloth