Oce Arizona T220UV, User Manual

Page: 68 / 114

68 T220UV User Guide
How to Empty the Waste Bottle
Introduction
The printer accumulates waste that is made up of ink and accumulated debris. The waste bottle is located on the Home side
of the gantry and is accessible by opening the gantry doors. A sensor monitors the waste level in the bottle, and a high level
is reported on the control panel.
When to do
The waste bottle should be emptied when the control panel indicates that the it is almost full. You can also do a visual
inspection to check the level and empty the waste bottle before it becomes full, if necessary.
Note:
If you need to replace the waste bottle container with a new one, or if you require a spare bottle, order part #
3010100266.
Illustration
[18] Gantry Doors Open To Access Waste Bottle
[18] Gantry Doors Open To Access Waste Bottle
Empty the Waste Bottle
1.
Remove the waste bottle from the bracket and put a cloth or paper towel in place to catch any drips while the bottle is emptied.
2.
Unscrew the lid and pour the waste into a suitable container for disposal.
Note:
Dispose of the waste in accordance with local laws or as directed in the UV ink MSDS sheets — See “Safety
Information” section.
3.
Replace the empty waste bottle by fitting it into the bracket.
4.
Ensure that the lid is securely screwed on to the waste bottle.