Oce Arizona T220UV, User Manual

Page: 48 / 114

48 T220UV User Guide
Change UV Power Setting
1.
Use the ACCEPT key to move through the displayed digits. The selected digit has an underline indicating it can be increased
or decreased using the + or - keys.
2.
When the digit you want to use is displayed, press ACCEPT and the underline moves to the next digit.
3.
When you are at the last digit, pressing ACCEPT advances to the Place Media display if Print Parameters were NOT enabled
in the Operator/Print Parameters menu.
Note:
If Display Print Parameters is set to OFF in the Operator/Print Parameters/ Statistics menu, the control panel display
shows the message “Place media on the table” and the print job can begin.
Change Horizontal and Vertical Offsets
1.
Use the ACCEPT key to move through the displayed digits. The selected digit has an underline indicating it can be increased
or decreased using the + or - keys.
2.
When the digit you want to use is displayed, press ACCEPT and the underline moves to the next digit.
3.
When you are at the last digit, pressing ACCEPT advances to the Place Media display if Print Parameters were NOT enabled
in the Operator/Print Parameters menu.
Note:
If Display Print Parameters is set to OFF in the Operator/Print Parameters/ Statistics menu, the control panel display
shows the message “Place media on the table” and the print job can begin.