Oce Arizona T220UV, User Manual

Page: 18 / 114

18 T220UV User Guide
Handling and Storage
[6] Handling & Storage
[6] Handling & Storage
Exposure Controls
[7] Exposure Controls
[7] Exposure Controls
Personal Protection
[8] Personal Protection
[8] Personal Protection
Disposal of UV Ink
[9] Disposal Considerations
[9] Disposal Considerations
Handling
Precautions: Toxic or severely irritating material. Avoid contacting and avoid breathing the material. Use only in a
well ventilated area. As with all chemicals, good industrial hygiene practices should be followed when
handling this material. Avoid contact with material, avoid breathing dusts or fumes, use only in a well
ventilated area. Wash thoroughly after handling. Do not get in eyes, on skin or clothing. Remove con-
taminated clothing and wash before reuse.
Storage
Conditions: Store in a cool dry place.
Isolate from incompatible materials.
Engineering
Measures Local exhaust ventilation or other engineering controls are normally required when handling or using this
product to avoid overexposure. It is recommended that facilities storing or using this material be
equipped with an eyewash and safety shower.
Area Strategy
Respiratory
Protection: Follow a respiratory protection program that meets 29 CFR 1910.134 and ANSI Z88.2 requirements
whenever work place conditions warrant the use of a respirator. Respiratory protection may be required
in addition to ventilation depending upon conditions of use.
Eye Protection: Wear safety glasses with side shields when handling this product. Wear additional eye protection such as
chemical splash goggles and/or face shield when the possibility exists for eye contact with splashing or
spraying liquid, or airborne material. Do not wear contact lenses. Have an eye wash station available.
Skin
Protection: Avoid skin contact by wearing chemically resistant gloves, an apron and other protective equipment de-
pending upon conditions of use. Inspect gloves for chemical break-through and replace at regular inter-
vals. Clean protective equipment regularly. Wash hands and other exposed areas with mild soap and
water before eating, drinking, and when leaving work. Use of protective coveralls and long sleeves is
recommended.
Gloves: Wear impervious material.
Disposal
Methods: Dispose in accordance with Federal, State, Provincial and Local regulations. Material may be compatible
with industrial waste incineration or inclusion in a fuel blending program. This characterization is sub-
ject to approval by your waste management contractor. This material should be recycled if possible.