Oce Arizona T220UV, User Manual

Page: 36 / 114

36 T220UV User Guide
Menu Structure
Introduction
There are three main menus accessed by pressing the MENU key pad. Once you have entered the menu system, press the
MENU key to advance the display to the next menu option. Press the ACCEPT key to access a menu’s displayed option.
Print Queue
■
Print Jobs
Operator
■
Maintenance
■
Test Prints
■
Special Prints
■
Print Parameters
■
Delete Files
■
Units, Set Clock
■
About Printer
Configure I/O
■
SCSI Port
■
Parallel Port
■
Serial Port
The Operator and Configure I/O menus have various submenus as indicated above. This section will provide specific details
of those submenus. The Print Queue has no submenus, but does provide various menu options to modify a print job after it
is selected. A detailed map of the whole menu structure is available in the Special Prints/Menu Tree Print submenu. Refer
to Appendix A for instructions to locate and print this map.
Print Queue Menu
The Print Queue menu allows the operator to select a job for printing from all jobs stored on the printer’s hard drive. Print
jobs are prepared using Onyx PosterShop software and then transferred to the printer, where they appear in the Print Queue.
The Print Queue menu provides the option to change the media thickness, image horizontal and vertical offsets, if desired.
It also offers the option to change Print Parameters such as number of copies and number of overprints, but only if these
parameters are activated in the Operator menu (see “Print Parameters” ). The details of these Print Queue options are provided
in the section “Select a Print Job” .
Operator Menu
The Operator menu has six submenus: Maintenance, Test Prints, Print Parameters, Units, Set Clock, and About Printer. The
details of these submenus and how to access them are provided below.