Oce Arizona T220UV, User Manual

Page: 42 / 114

42 T220UV User Guide
Training Requirements
Introduction
Before operating the Arizona T220UV printer, make sure you have read and understood the section “Safety Guidelines”.
Océ Operator Training
For optimal safety and print quality, the Arizona T220UV printer operator must be trained by a qualified Océ service
personnel. Océ training provides a general orientation to the Arizona T220UV printer safety and operating procedures. This
training involves both the User and Maintenance Training modules.
PosterShop Training
Maximum performance from the Arizona T220UV printer requires a properly trained operator. Océ Service and Support
Group trains the operator in the use of the Arizona T220UV hardware and software at installation. However, this is not a
substitute for formal PosterShop® training.
Operators of the Arizona T220UV should be fully versed in the operation of Onyx PosterShop® . For any operator unfamiliar
with its operation, Onyx PosterShop® training is required. On-site or off-site training courses are available; contact Onyx
Graphics Corporation for more information: Visit http://www.onyxgfx.com/support_training.html