Oce Arizona 400 Series GT, User Manual

Page: 43 / 270

Function Component
Displays the strength of the table vacuum system. If it reads
less than 10"Hg, check for vacuum leaks. 7) Vacuum Gauge
Starts the current print job. 8) Print Button
Designated area for cleaning the printheads and the under-
side of the carriage. 9) Maintenance Station
Five vacuum zone control handles determine if vacuum
zones 2 to 6 on the printer table are active when the vacuum
pump is switched on. Zone 1 is always on so it has no
control handle. The zones on the Océ Arizona 400 Series
XT model are different (see Chapter 6 for details). 10) Vacuum Zone
Control Handles
There are two ink bays: the Primary bay contains CMYK
ink and the coolant bottle; the Secondary bay holds the
optional light Cyan, Magenta, and White inks or Varnish. 11) Ink Bay
Ink filters are behind a door under the ink bags. The filters
remove unwanted particulate matter from the ink. 12) Ink Filters
Provides coolant to maintain correct temperature of the
ink in the printheads. (13) Coolant Bottle
Toggles the pump to turn the table vacuum on/off. Vacuum
must be on prior to starting a print. (14) Vacuum Table
Foot Switch
Provides access to the connections required to plug in the
podium components such as LCD monitor, mouse, and
E-stop. Also is a storage location for the coolant supply
bottle. (15) Bulkhead access
door
Chapter 4 - How to Navigate the User Interface 43
Operator Interface Hardware