Oce Arizona 400 Series GT, User Manual

Page: 124 / 270

2.
Click on OK to proceed.
C: Remove Media from the Take-up Shaft in Printer or Remove Take-up Shaft
1.
If you want to remove the printed images without removing the take-up roll from the
printer you can press the left pedal to rotate the take-up media shaft in the reverse direc-
tion. You can then roll up the media by hand as it comes off the take-up roll.
2.
To remove the take-up roll without manually rolling up the media, tap the right pedal
momentarily to rotate the take-up shaft one revolution to the unlocked position in the
forward direction.
D: Remove the Supply Shaft From the Printer
1.
If you want to change the supply shaft, momentarily press the left pedal to rotate the
shaft to the unlocked position.
2.
Remove the supply shaft from the printer by pulling it towards you. Pull one end out at
a time.
E: Remove Media Roll Or Empty Core From the Media Shaft
1.
Place the media shaft on a suitable work surface.
2.
Unlock the media shaft core locks using a 5 mm hex key.
3.
Slide the media core off the shaft.
Chapter 7 - How to Operate the Roll Media Option 124
How to Unload and Cut Media