Oce Arizona 318 GL, User Manual

Page: 82 / 224

Icon Function
Unload Prepares the RMO to allow the operator to cut the existing media, re-
move it, and replace it with a new roll.
Initialize Sets up tension on the loaded media and prepares the RMO to print on
that media.
Print Side Operator can select either Print Side In or Print Side Out. Print Side In
allows you to print on the back side of the media. The default setting is
Print Side Out.
Media Parameters Each roll media has a width and thickness that must be entered and
you can also set the Tension and any step corrections required. You
can create a new media or edit an existing one by changing the param-
eter values and then saving them under a new media name.
How to Use the Roll Media Manager
The procedures to use these icons to load and unload media is explained in the next two
sections. How to verify or change media parameters and to actually print a roll media job is
explained in the section "How to Print on Roll Media".
Roll Media Manager
82 Chapter 6 - How to Operate the Roll Media Option