manualshive.com logo in svg

Oce Arizona 318 GL, User Manual

The Oce Arizona 318 GL User Manual is a comprehensive guide that provides step-by-step instructions and troubleshooting tips for maximizing the performance of your Oce Arizona 318 GL printer. Download this manual for free from our website and unlock the full potential of your device.

Share
Download
background image

Select the name of the Media that you want to use for this Quick Set. See section xxx for
information on how to create a media.

•

Print Mode

Always select Quality-Layered Printer Print Mode if you want to use the layered printing
capabilities of theOcé Arizona 318.

Advanced

 Quick Set Options

To access the Advanced Quick Set Options click the Advanced button. The tabs you need to
access for white ink workflow are:
•

Postscript

In this window ensure that 2-stage processing is turned off in order for Rip to successfully
process your white ink data. Note that the default setting is to not use Two Stage Processing so
it is not necessary to check this each time you create or edit a Quick Set based on the defaults
as long as it has not been enabled in the Default Quick Set.

•

Color Correction

This area will link to an existing Filter that has been exported from Preflight's Color Correction
area. From Preflight you can export all the settings made using the Spot Layer Tool or any
other Color Correction parameters as a Filter for use on files to be prepared for white ink
printing. When you link to a Filter the Quick Set will use the same set of parameters that were
present when you exported it from Preflight.

NOTE

Many of the Quick Set and Filter settings for a job can be overridden in RIP-Queue or Preflight, if

desired.

Procedure

1.

In ProductionHouse RIP-Queue select your printer, and click on the Configure Printer button. This
opens the Configure Printer dialog.

2.

From the Quick Sets tab, select the Quick Set you want to edit or copy (or select New to build one
from defaults).

3.

If you are going to edit an existing Quick Set, Click on Edit. This opens the Edit Quick Set dialog.

4.

Make any modifications to the Quick Set that you want to make, and click OK.

NOTE

As a shortcut, click the Edit Quick Set button on the toolbar to edit a Quick Set.
However, you cannot change the Quick Set Name when you use this method.

5.

Use the reference material in the start of this section to guide you in the Quick Set configuration.

6.

To use any of the Quick Sets that you created, when you open a file in ProductionHouse you can
select a Quick Set from the File, Open dialog box.

7.

You can also create a Filter that will save any of the current Spot Layer Tool settings. The Filter
will also include any of the other current setting under the Color Correction menu. The Filter will
be available for future use with Color Correction or it can be used in a Quick Set.

How to Create and Use Quick Sets

Chapter 8 - How to Work With White Ink

161

Summary of Contents for Arizona 318 GL

































































































































































































































Reviews:

No comments

Related manuals for Arizona 318 GL

Panasonic FP-D350 Manual preview
FP-D350
Brand: Panasonic Pages: 83
Canon PIXMA MG3120 Getting Started Manual preview
PIXMA MG3120
Brand: Canon Pages: 4
Canon TS8250 Online Manual preview
TS8250
Brand: Canon Pages: 521
Canon TS5350i Series Online Manual preview
TS5350i Series
Brand: Canon Pages: 456
Quest Payment Systems Donation Point Even Quick Start Manual preview
Donation Point Even
Brand: Quest Payment Systems Pages: 2
Oki OKIPAGE 8p Plus Setup Manual preview
OKIPAGE 8p Plus
Brand: Oki Pages: 18
Olivetti FS-519 Service Manual preview
FS-519
Brand: Olivetti Pages: 111
Printek DP-530si Operator'S Manual preview
DP-530si
Brand: Printek Pages: 34
Xerox 6R941 Quick Reference Manual preview
6R941
Brand: Xerox Pages: 8
Kyocera ECOSYS M6035cdn Operation Manual preview
ECOSYS M6035cdn
Brand: Kyocera Pages: 31
Xerox 3600B - Phaser B/W Laser Printer Quick Manual preview
3600B - Phaser B/W Laser Printer
Brand: Xerox Pages: 2
Olivetti PR4 SL User Manual preview
PR4 SL
Brand: Olivetti Pages: 8
Lexmark C6160 User Manual preview
C6160
Brand: Lexmark Pages: 142
Microcom 428M Operator'S Manual preview
428M
Brand: Microcom Pages: 207
Wasp 4070 ZX Original Instructions Manual preview
4070 ZX
Brand: Wasp Pages: 82
Epson AcuLasaer C1900 Quick Reference Manual preview
AcuLasaer C1900
Brand: Epson Pages: 17
Epson 3880 - Stylus Pro Color Inkjet Printer Specifications preview
3880 - Stylus Pro Color Inkjet Printer
Brand: Epson Pages: 2
Epson AcuLaser CX11NF Fax Manual preview
AcuLaser CX11NF
Brand: Epson Pages: 64

Brands by name

Popular brands

Load more brands