manualshive.com logo in svg

Oce Arizona 318 GL, User Manual

The Oce Arizona 318 GL User Manual is a comprehensive guide that provides step-by-step instructions and troubleshooting tips for maximizing the performance of your Oce Arizona 318 GL printer. Download this manual for free from our website and unlock the full potential of your device.

Share
Download
background image

Ink Bags in the Ink Bay

Ink Filters

The printheads in your printer are protected from contaminants in the ink by means of ink filters.
These are easily accessed and can be replaced by the operator when they become blocked with
debris (see the Maintenance section "Change Ink Filters").

NOTE

A loss of pigment when printing a nozzle check or long ink fill times indicates that a filter is

clogged and must be replaced.

How to Store and Handle UV Ink

To ensure print quality and to extend the life of printheads in your printer, UV inks must be
properly handled and stored correctly.
• Inks must be stored within a temperature range of 5 - 30°C (41 - 86°F). Exposure to extreme

temperatures will reduce the expected life of the ink.

• Do not use ink that is past the expiry date.
• Store in cool, dry place and keep away from heat and direct sunlight.

White Ink

If your printer has the white ink option and white is not printed on a regular basis, pigment
settling can occur in the white ink printheads. During periods of white ink inactivity the printer
will automatically try to maintain the white ink channel using the following methods:
• ink recirculating
• spitting

Additional efforts may be required to recover nozzle performance for the white ink printheads.

Arizona Printer Ink

Chapter 9 - Ink System Management

165

Summary of Contents for Arizona 318 GL

































































































































































































































Reviews:

No comments

Related manuals for Arizona 318 GL

DASCO EBS-260 Cleaning Procedure preview
EBS-260
Brand: DASCO Pages: 2
Felix Storch Pro L Quick Start Manual preview
Pro L
Brand: Felix Storch Pages: 39
Felix Storch Pro 3 Assembly Manual preview
Pro 3
Brand: Felix Storch Pages: 10
Canon i9100 Series Setup Instructions preview
i9100 Series
Brand: Canon Pages: 2
Canon imageRUNNER C3480 Easy Operation Manual preview
imageRUNNER C3480
Brand: Canon Pages: 92
Oki C931dn Manual Del Usuario preview
C931dn
Brand: Oki Pages: 328
Panasonic KX-MC6020 Service Manual preview
KX-MC6020
Brand: Panasonic Pages: 486
Oki C9650 Series User Manual preview
C9650 Series
Brand: Oki Pages: 126
Oki ES9466 MFP Manual preview
ES9466 MFP
Brand: Oki Pages: 20
Konica Minolta DRYPRO Model 793 Operation Manual preview
DRYPRO Model 793
Brand: Konica Minolta Pages: 156
BIO RAD VERSADOC User Manual preview
VERSADOC
Brand: BIO RAD Pages: 61
Radio Shack TRS-80 MICRO Hardware Manual preview
TRS-80 MICRO
Brand: Radio Shack Pages: 42
Savin MLP28 Operating Instructions Manual preview
MLP28
Brand: Savin Pages: 299
Olivetti PG 2028 SPECIAL Operation Manual preview
PG 2028 SPECIAL
Brand: Olivetti Pages: 104
Oce Arizona 640 GT User Manual preview
Arizona 640 GT
Brand: Oce Pages: 230
Oce VarioLink 2650cp Quick Setup Manual preview
VarioLink 2650cp
Brand: Oce Pages: 2
Kyocera Mita Ecosys FS-1800+ Installation Manual preview
Ecosys FS-1800+
Brand: Kyocera Mita Pages: 31
FujiFilm Printpix NC-400D User Manual preview
Printpix NC-400D
Brand: FujiFilm Pages: 47

Brands by name

Popular brands

Load more brands