Obihai OBi100, Administration Manual

Page: 57 / 220

Copyright 2010-2013 Obihai Technology, Inc. 57
- Voice Disconnected: Mobile phone is in a connected call, but the audio stays in the phone instead of going
to OBiBT
- 0 Active Calls
- 1 Active Call: Mobile phone is in a connected call, with audio going to OBiBT

BindingService – The external paired device currently connected with the OBiBT
SP n Service Status (n = 1, 2, 3, 4)
Note that SP3 and SP4 Service Status are available on the OBi2 Series and OBi3 Series models only. The SP n service status
values indicate the current state of the service with regard to its configuration (or not) and if configured its registration
status. If there are problems with the registration or authentication of the OBi with a prescribed service, the SIP 4xx error
message will be displayed here. This is very useful information for troubleshooting issues with SIP-based services.
OBiTALK Service Status
The status of the OBiTALK Service includes the following values:

Status – Possible values are:
- Normal (User Mode): The service is functioning normally
- Backing Off: The service is currently down; the device is taking a short pause before retrying connection

CallState – Possible values are:
- N Active Calls (where N = 0, 1, .., up to the maximum number of calls allowed in the configuration
OBiPLUS Service Status
OBiPLUS is a small business collaboration system. It is an optional service that requires a separate subscription. You may
subscribe to this service on OBiTALK.com. The administration of this service is described separately in the OBiPLUS
Administration Guide.
The status is available on the OBi202 and OBi302 only. The following status values are available:

LicenseState – The state regarding the OBiPLUS Subscription. Possible values are:
- Service not subscribed
- Premium Active: Premium level subscription is currently active
- Basic Active: Basic level subscription is currently active
- License Expired: Service is not available because your last subscription has expired.
LAN Status (OBi202/OBi302 only)
The LAN Status page shows the devices currently on the LAN. There are two sections:

Attached Devices: All the devices that the router has discovered on the LAN side; each entry has a MAC address
and an IP address

DHCP Clients: All the DHCP clients that have an active lease with the DHCP server; each entry has a Client Name, a
MAC address, an IP address, and the lease expiration time (in seconds)
Below is a screen shot of a typical LAN Status page. This page is available when the OBi202/OBi302 is working in router
mode.