Obihai OBi100, Administration Manual

Page: 169 / 220

Copyright 2010-2013 Obihai Technology, Inc. 169
TonePattern Obihai Tone Pattern Script
914-16,1371-16,1777-
16;20;(1/.274+0,2/.274+0,4/.380+0,0/0+4)
SIT Tone 3
ToneName Special Information Tone - 3 (Not configurable)
TonePattern Obihai Tone Pattern Script 914-16,1371-16,1777-
16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4)
SIT Tone 4
ToneName Special Information Tone - 4 (Not configurable)
TonePattern Obihai Tone Pattern Script 985-16,1371-16,1777-
16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4)
Outside Dial Tone
ToneName Outside Dial Tone (Not configurable)
TonePattern Obihai Tone Pattern Script 385-16;10
R-Command Tone
ToneName R-Command Tone (Not configurable)
TonePattern Obihai Tone Pattern Script 400-16;5
Paging Tone
ToneName Paging Tone (Not configurable)
TonePattern Obihai Tone Pattern Script 480-16;1;(.2+.2)
Ring Profile A & B Features of the OBi Device
The general format of an OBi Ring Profile is as follows: [field-1];[field-2];...;[field - 5]
Use the ";" to separate up to five (5) configuration fields.
Please note that no spaces are allowed to be used in a tone profile pattern.
Field–1 Composition:
Field-1 describes the overall ringing duration in seconds.
The expression is a numeric value, and supports up to 3 decimated digits.
The numeric value can negative, zero, and positive:

Negative value: Ringing lasts indefinitely

No value: Ringing lasts infinitely

Zero value: Ringing is skipped

Positive value: Normal ringing duration
Example: 30.5
The above example illustrates a ringing tone that terminates after 30.5 seconds.