Obihai OBi100, Administration Manual

Page: 212 / 220

Copyright 2010-2013 Obihai Technology, Inc. 212
SIP Service Configurable Inbound Call Routing Rule (2)
Direct / Single-Stage Dialing (Route to Voice Gateway)
Fax Pass Through (G.711)
Modem Pass Through (G.711)
In-Band DTMF (G.711)
Out of Voice Band DTMF (RFC 2833)
Out of Voice Band DTMF (INFO Method)
Call Progress Tone Generation
Tone Profile per SIP SP and OBiTALK service
Ring Profile per SIP SP and OBiTALK service
Star Code Profile per SIP SP and OBiTALK service
Full Duplex Audio
G.165, 168 Echo Cancelation
VAD – Voice Activity Detection
Silence Suppression
Comfort Noise Generation
Three Way Conference Calling with Local Mixing
Hook Flash Event Signaling
Flash Hook Timer
Caller ID – Name & Number per Bellcore, ETSI and DTMF
MWI – Message Waiting Indicator
Visual Message Waiting Indication (VMWI)
Daylight Savings Time Support – North & South Hemispheres
Caller ID Enable /Disable
Caller ID Number
Caller ID Name (Alphanumeric)
Call Waiting
Maximum Session Control
Call Forward - Unconditional
Call Forward on Busy
Call Forward on No Answer (Ring Count Configurable)
Call Transfer Enable / Disable
Anonymous Call Block
Anonymous Call
Do Not Disturb
Call Return
Repeat Dialing
Call Progress Tones
Configurable Call Progress Tone
Call Progress Tone Profiles (2)
Dial Tone
Busy Tone
Ringback Tone
Reorder Tone
Confirmation Tone
Holding Tone
Second Dial Tone
Stutter Tone
Howling Tone
Prompt Tone
Call Forwarded Tone
Conference Tone
SIT Tones (1-4)
Ringing & Call Waiting Tone Configuration
Ring Patterns (10) - Configurable
Call Waiting Tone Patterns (10) - Configurable
Call Waiting Tone Pattern Profiles (2)
Star Code Configuration
Configurable Start Codes
Star Code Profiles (2)
Redial