Obihai OBi100, Administration Manual

Page: 179 / 220

Copyright 2010-2013 Obihai Technology, Inc. 179
Star Code Profile Parameter Guide:
Parameter Description Default Setting
Code1 Default = Redial Star Code *07, Redial, call($Ldn)
Code2 Default = Call Return Star Code *69, Call Return, call($Lcn)
Code3 Default = Block Caller ID (Persistent) Star Code *81, Block Caller ID, set($Bci,1)
Code4 Default = Unblock Caller ID (Persistent) Star
Code *82, Unblock Caller ID, set($Bci,0)
Code5 Default = Block Caller ID Once Star Code *67, Block Caller ID Once, set($Bci1,1)
Code6 Default = Unblock Caller ID Once Star Code *68, Unblock Caller ID Once, set($Ubci1,1)
Code7 Default = Call Forward Unconditional Star
Code *72, Cfwd All, coll($Cfan), set($Cfa,1)
Code8 Default = Disable Call Forward Unconditional
Star Code *73, Disable Cfwd All, set($Cfa, 0)
Code9 Default = Call Forward on Busy Star Code *60, Cfwd Busy, coll($Cfbn), set($Cfb,1)
Code10 Default = Disable Call Forward on Busy Star
Code *61, Disable Cfwd Busy, set($Cfb, 0)
Code11 Default = Call Forward on No Answer Star
Code *62, Cfwd No Ans, coll($Cfnn), set($Cfn,1)
Code12 Default = Disable Call Forward on No Answer
Star Code *63, Disable Cfwd No Ans, set($Cfn,0)
Code13 Default = Block Anonymous Calls Star Code *77, Block Anonymous Call, set($Bac,1)
Code14 Default = Unblock Anonymous Calls Star Code *87, Unblock Anonymous Call, set($Bac,0)
Code15 Default = Enable Call Waiting Star Code *56, Enable Call Waiting, set($Cwa,1)
Code16 Default = Disable Call Waiting Star Code *57, Disable Call Waiting, set($Cwa,0)
Code17 Default = Do Not Disturb Star Code *78, Do Not Disturb, set($Dnd,1)
Code18 Default = Disable Do Not Disturb Star Code *79, Disable DND, set($Dnd,0)
Code19 Default = Repeat Dial Star Code *66, Repeat Dial, rpdi($Ldn)
Code20 Default = Disable Repeat Dial Star Code *86, Cancel Repeat Dial, rpdi()
Code21 Default = Set Speed Dial Star Code *74([1-9]|[1-9]x), Set Speed Dial,
coll($Spd[$Code])
Code22 Default = Check Speed Dial Star Code *75([1-9]|[1-9]x), Check Speed Dial,
say($Spd[$Code])
Code23 Default = Loopback Media Star Code *03, Loopback Media, set($Lbm1,1)
Code24 Default = Loopback RTP Star Code *04, Loopback RTP Packet, set($Lbp1,1)
Code25 Default = Force G711u Codec Star Code *4711, Use G711 Only, set($Cdm1,3)
Code26 Default = Force G729 Codec Star Code *4729, Use G729 Only, set($Cdm1,4)
Code27 Default = Clear Speed Dial Star Code *76([1-9]|[1-9]x), Clear Speed Dial,
set($Spd[$Code],)
Code28 Default = Blind Transfer Star Code *98, Blind Transfer, coll($Bxrn)
Code29 Default = Barge In Star Code *96, Barge In, set($Bar1,1)
Code30 Default = OBiBT 1 Discoverable Star Code
(Not available on OBi100 and OBi110) *28, OBiBT Discoverable, btdscvr(0)
Code 31 Default = Enable ObiWiFi as Access Point
(Not available on OBi100 and OBi110) *27, run OBiWiFi as Access Point, wifiap()
Code32 Default = Set OBiPLUS to Day Mode Star Code
(Requires OBiPLUS Subscription) *10, Day Mode, set($Opm,0)
Code33 Default = Set OBiPLUS to Night Mode Star
Code
(Requires OBiPLUS Subscription) *11, Night Mode, set($Opm,1)
Code34 Default = Set OBiPLUS to Auto Night Mode
Star Code *12, Auto Night Mode, set($Opm,2)