Obihai OBi100, Administration Manual

Page: 204 / 220

Copyright 2010-2013 Obihai Technology, Inc. 204
Specifications & Environmental Characteristics of the OBi Device
OBi100
General
Brand
Obihai
Browse Obihai Devices
Manufacturer Obihai
Hardware Designer Obihai Technology, Inc.
Model Name OBi100
Release Date March 2011
Microprocessor
Chip Vendor Obihai SoC
Width of Machine Word 32 bit
Instruction Set MIPS
FXS SLIC (Subscriber Line Integrated Circuit)
Ringer Specifications
Ring Frequency: 14Hz – 68Hz
Ring Waveform: Trapezoidal, Sinusoidal
Ring Voltage: 55v – 85v
Maximum Ring Load 5 REN (Ringer Equivalence Number)
FXS (PHONE Port)
Configuration Settings
Recursive Digit Map & Associated Outbound Call Routing
On-Hook Tip Ring Voltage: 30v – 52v
Off-Hook Current Max: 15mA – 45mA
Impedance: 12 Independent Settings
DTMF Playback Level: -90 dBm – 3dBm
Caller ID Method (FSK Bell202, FSK V.23, DTMF FI/SE/DK)
Caller ID Trigger (Before / After First Ring, Polarity Reversal)
Channel Tx Gain: -12dB – 12dB
Channel Rx Gain: -12dB – 12dB
Silence Detect Sensitivity
Hook--Flash Time Max
HookFlash Time Min
CPC Delay Time
CPC Duration
Idle Polarity
Connect Polarity
Management – Configuration
Local Access Interface IVR, Web Page – Password Protected (Admin & User Level Log-in)
Remote Access Interface Syslog (Multi-Level Granularity), Invokable via SIP Notify, Web, Provisioning
Device Web Page Standard HTTP v1.1, XML v1.0
Remote Provisioning XML via TFTP or HTTP, TR069 / TR104
Secure Remote Provisioning SSL via HTTPS , Encrypted XML via HTTP or TFTP – Dedicated User Name & Password
Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password
Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration **
Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML
LED Indications Power, Device Status, Upgrade Progress Status, Ethernet Actvty, PHONE Status
RTP Statistics
RTP Transport Type
Audio Codec Type (Tx/Rx)
RTP Packetization - ms (Tx/Rx)