Obihai OBi100, Administration Manual

Page: 141 / 220

Copyright 2010-2013 Obihai Technology, Inc. 141
PHONE Port Parameter Guide:
Parameter Description Default Setting
PHONE Port
Enable Enable the PHONE port Yes
DigitMap This Digit map serves to restrict the numbers that can be
dialed or called from the PHONE port. If the caller dials a
number that is not allowed by the digit map, OBi plays SIT
tone followed by a short error message to let the caller
know that the dialed number is invalid.
See
OBi Call Routing and Digit Map Section for a
description of the syntaxes to specify a digit map.
For OBi100:
([1-9]x?*(Mpli)|[1-9]|
[1-9][0-9]|911|**0|***|
**1(Msp1)|**2(Msp2)|
**9(Mpp)|(Mpli))
For OBi110:
([1-9]x?*(Mpli)|[1-9]|
[1-9][0-9]|911|**0|***|#|
**1(Msp1)|**2(Msp2)|
**8(Mli)|**9(Mpp)|(Mpli))
For OBi200/202/300/302:
([1-9]x?*(Mpli)|[1-9]S9|
[1-9][0-9]S9|911|**0|***|#|##|
**70(Mli)|**8(Mbt)|**81(Mbt)|
**82(Mbt2)|
**1(Msp1)|**2(Msp2)|
**3(Msp3)|**4(Msp4)|
**9(Mpp)|(Mpli))
OutboundCallRoute After the caller dials a number that is acceptable
according to the DigitMap, OBi device uses this outbound
call routing rule to determine which service to make this
call with. If no appropriate call route found, OBi plays SIT
tone followed by a short error message to let the caller
know that there is no call route to place the call.
See
OBi Call Routing and Digit Map Section for a
description of the syntaxes to specify this parameter
For OBi100:
{([1-9]x?*(Mpli)):pp},
{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
For OBi110:
{([1-9]x?*(Mpli)):pp},
{(<#:>|911):li},
{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**8:>(Mli)):li},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}