Obihai OBi100, Administration Manual

Page: 137 / 220

Copyright 2010-2013 Obihai Technology, Inc. 137
is in a busy state (such as ringing, dialing, playing
reorder, or already having 2 calls in progress)
Note: It is possible for a user to set this parameter from
the phone using a Star Code
CallForwardOnBusyNumber Directory number to forward all incoming calls on this
service when the device is busy. Maximum Length is 127
characters.
Note: It is possible for a user to set this parameter from
the phone using a Star Code
CallForwardOnNoAnswerEnable Enable call forwarding of all incoming calls when the call
is not answered after a period as specified in
CallForwardOnNoAnswerRingCount. If
CallForwardOnNoAnswerNumber is blank, this
parameter is treated as if it has been set to No.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
CallForwardOnNoAnswerNumber Directory number to forward all incoming calls when the
call is not answered after a period specified in
CallForwardNoAnswerRingCount
Note: It is possible for a user to set this parameter from
the phone using a Star Code
CallForwardOnNoAnswerRingCount Number of rings to be considered by the device as no
answer to an incoming call.
Note: 1 ring is approximately 6s 2
BlockedCallers A comma separated list of up to 10 caller numbers to
block from calling this service
AnonymousCallBlockEnable Enable blocking of Anonymous Calls on this service.
Anonymous calls are rejected with a SIP 486 (Busy)
response and Call Forward On Busy service is not
applied.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
AnonymousCallEnable Enable masking of Caller-ID information for all outgoing
calls. If enabled, the called party should perceive the call
as coming from an anonymous caller.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
DoNotDisturbEnable Enable Do Not Disturb Service. If enabled, all incoming
calls on this service are treated as if the device is busy.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
BridgedOutboundCallMaxDuration Limit on the call duration in seconds for all outbound
calls that are bridged from another trunk. A blank or 0
value implies the call duration is not limited.
AAAskForConfirm When an incoming call on this service is answered by the
AA, enabling this option lets the AA ask for confirmation Yes