NTT docomo FOMA N705i, Instruction Manual

Page: 94 / 518

92
Sound/Screen/Ligh
t Settings
Setting Sound Effect for Ring
Tones and Melodies
<Sound effect>
Use this function to get richer fuller sound when the
FOMA terminal with a Stereo Earphone Set (optional)
plays melodies, ring tones for voice/videophone call
or mail, sound effects and i-motion sound.
1
i
“SETTINGS” “Incoming call”
“Sound effect” “Stereo&3D sound”
“ON” or “OFF”
● What is Sound effect
It is the function uses a Stereo Earphone Set to
produce 3-dimensional and resonating sound. This
function allows you to enjoy i-
α
ppli games and
melody playback with richer and more realistic sound.
When you play an i-motion with sound effects, the
effects simultaneously enhance the sound played
through the speaker and earphones. Sound is
enhanced by effects that provide a natural-sounding
3D sound field and rich low tones as well as clearly
defined voice and music audio.
z
i-motion with sound effects can be identified by the
icon shown on the movie list screen. → P.252
Setting the Vibration to Notify
You of Incoming Calls
<Vibrator>
You can set different vibration patterns to notify you
when you receive a voice call, videophone call or
mail.
1
i
“SETTINGS” “Incoming call”
“Vibrator” Select an item to set the
vibration:
Select “Phone” to set the vibration for voice calls
and 64K data communication.
Select “Mail” to set the vibration for i-mode mail,
Area Mail, SMS and packet communication.
2 Select the vibration pattern:
Pattern 1- Pattern 3 …… Vibrates in each pattern.
When you switch the highlighted item while selecting
an item, the FOMA terminal vibrates in the
highlighted pattern.
Melody linkage …… The FOMA terminal vibrates in
a pattern matched to the melody set as the ring tone.
OFF …… The FOMA terminal does not vibrate.
■
Icons on the standby display while setting the
vibration pattern
: The vibration starts when receiving either voice
or videophone calls.
: The vibration starts when receiving either mail/
chat mail/MessageR/F.
: Both “ ” and “ ” are set.
N
z
The 3D effect differs depending on the individual. If
the 3D sound bothers you, set this function to “OFF”.
z
The sound with the built-in speaker cannot be
changed by sound effect even when this function set
to “ON”.
z
When “Headset usage setting” is set to
“speaker”, this function is deactivated. When
set to “Headset only”, the function is activated.
N
z
When the vibration is set, take care that the vibration
does not move the FOMA terminal towards fire (e.g.
on a space heater) or cause it to fall off a table, etc.
z
Even when “Melody linkage” is selected, the FOMA
terminal not always vibrates to the melody. When no
vibration pattern is set for the melody or when an
i-motion or Chaku-Uta-Full
®
is set as the ring tone, the
FOMA terminal vibrates in Pattern 2.
z
When you receive the Area Mail for the earthquake
early warning, the FOMA terminal vibrates linked with
the beep regardless of this setting.
<Vibrator priority>
z
When the vibrator settings are duplicated, the priority
is assigned as follows:
① Vibrator for “Ring tone/Image (for individual)”
② Vibrator for “Ring tone/Image (for group)”
③ Vibrator setting