NTT docomo FOMA N705i, Instruction Manual

Page: 474 / 518

21
6
Click "
接続先（
APN
）設定
" (Specify
the access point (APN))
As the APN of mopera "mopera.ne.jp" is
assigned to cid1 and APN of mopera U
"mopera.net" to cid3 by default, assign the APN
to cid2 or between cid4 to cid10.
Open the "
接続先（ APN ）の追加 " (Add the
access point (APN)) screen by clicking the " 追
加 " (Add) button, select the connection method,
specify an access point name that supports
FOMA packet communication and click "OK".
The "
接続先（ APN ）設定 " (Specify the access
point (APN)) screen reappears.
Half-pitch alphanumeric characters, hyphen (-) and
dots (.) can only be entered for the access point.
7
Select the Access point (APN) and click "OK"
The screen of Step 5 reappears.
The access point (APN) entered in Step 6 is displayed on "
接続先（ APN ）の選択 " (Select the access point (APN)).
8
Confirm the Access point (APN) on "
接続先（
APN
）の選択
" (Select the
access point (APN)) and click "
次へ
" (Next)
To specify advanced settings (TCP/IP settings)
Clicking " 詳細情報の設定 " (Detailed settings) displays the setup screen for "IP address" and
"Name server". If they must be input as the provider or corporate LAN information, follow the input
information directions and enter the addresses.
9
Specify a user ID and password,
select the accessible user and
click "
次へ " (Next)
When " すべてのユーザー " (All users) is
selected in the "
使用可能ユーザーの選択
"
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
When setting the user ID and password, input
the correct, case-sensitive data provided by the
service provider.
For Windows Vista
Specify the user ID and password and click
"
次へ
" (Next)
Proceed to Step 11.
10
Check "
最適化を行う
" (Optimize the setting) and click "
次へ
" (Next)
Optimize the communication settings of a PC to use FOMA packet communication. If they are already
optimized, this screen does not appear. Proceed to Step 11.
11
Check the setting information and
click "
完了 " (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking "
デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "
戻る " (Back).