NTT docomo FOMA N705i, Instruction Manual

Page: 350 / 518

348
Netw
ork Ser
vices
● When the current call and incoming call
are different types
If you receive a videophone call or 64K data
communication during a voice call, if you receive a
voice call or 64K data communication during a
videophone call, or if you receive a voice or
videophone call during 64K data communication, use
this procedure to end your current call or 64K data
communication to answer the incoming call.
<Example: Ending the current videophone call to
answer an incoming voice call>
1 You hear the double tones (repeated
soft double-beeps) and the voice call
ringing screen appears
When you receive a 64K data communication,
the double tones (repeated soft double-beeps)
do not sound.
2
r
■
For 64K data communication
y
Receive the call on a PC
Manually rejecting calls or connecting
to the Call Forwarding or Voice Mail
service
<Example: When Set in-call arrival is set to “Activate”
and Incoming Call Mng is set to “Answer”>
1 When you hear the double tones
(repeated soft double-beeps), press
u
(FUNC)
2 Select how to handle the received call
■ To reject a received call
“Call Rejection”
■ To forward a received call to the
forwarding number
“Call Forwarding”
■ To transfer a call to the Voice mail service
center
“Voice Mail”
With any of the above procedures, you can
return to your first call.
Setting up Remote Control
<Remote Control>
You can operate the “Voice Mail” or “Call Forwarding
Service”, etc. from push-key-type ordinary phones,
payphones, DoCoMo mobile phones, etc.
z
To use the “Voice Mail” or “Call Forwarding” service
overseas, set Remote Control beforehand.
z
For details on operating network services from a
payphone, etc., refer to the “Mobile Phone User’s
Guide [Network Services]”.
1
i
“SERVICE” “Remote Control”
Select any item:
Activate ・ Deactivate …… Activates or deactivates
the Remote control.
Check setting
……
Checks the current Remote
control settings.
Multi Number
<Multi Number>
You can add and use the maximum of two additional
numbers (additional number 1 and additional number
2) other than the basic number as the phone numbers
of the FOMA terminal.
z
Cannot be used with 2in1 at the same time.
z
The name stored for the multi number (basic
number, additional number 1/2) respectively
appears on the screen when making or receiving a
call.
z
When you make a call using the Redial/Received
calls record, the multi number used for making or
receiving a call at the last time is displayed and the
call is made from the number.
Using Multi Number
1
i
“SERVICE” “Multi Number”
Select any item:
Set Multi Number …… Specifies the phone number
you use for ordinary calls.
Basic Number
*
…… Sets to call from the
subscribed phone number (basic number).
Additional Number1 ・ Additional Number2
*
…… Sets to call from the additional number.
Check setting …… Checks the current Multi number
settings.
Number Setting …… Registers the additional
number notified at the subscription of the Multi
number to the FOMA terminal.
Highlight the item to register (or change) the
additional number
o
(Edit) Enter the name
Enter the additional number
You can enter up to 8 double-byte or 16 single-byte
characters for the name and you can enter up to 26
digits for the additional number.