NTT docomo FOMA N705i, Instruction Manual

Page: 201 / 518

199
Ma
il
• Omakase Lock is set
• When Self mode is set
z
Area Mails may not be received when:
• During a videophone call
• Data is sent and received
When You Receive Early
Warning “Area Mail”
<Receive Area Mail>
When the FOMA terminal is in a service area, the
Area Mail is automatically received.
z
When you receive Area Mail, the “ ” icon
appears at the top of the screen.
z
Received Area Mail is stored in Inbox.
z
You can store up to 100 Area Mails on the FOMA
terminal.
● When you receive the Area Mail for the
earthquake early warning
When you receive the Area Mail, you are notified on
the description screen with beep and vibration.
The screen returns to the previous screen, when you
press any of
d
,
t
and
y
.
z
You cannot change the volume of the beep.
However, you can set the ring time for beep or the
beep ON/OFF with setting for “Beep setting” in the
“Area Mail setting”.
The ring tone for the Area Mail sounds when the
beep sound setting is set to “OFF”.
z
When Manner mode is set, the beep is determined
by “Manner mode set”.
z
The FOMA terminal vibrates linked with the beep
regardless of the “Vibrator” setting.
● When you receive the Area Mail other
than the earthquake early warning
When you receive the Area Mail, you are notified on
the “Receive Area Mail” or the “Description Screen”,
then notifies them with a beep for the Area Mail (the
screen is specified by the provider).
The “Receive Area Mail” screen returns to the
previous screen, if no operation is performed or you
press any key. The description screen returns to the
previous screen, when you press any key
d
,
t
and
y
.
z
The volume of the ring tone is set to the same
volume set at “Mail” of “Ring volume”.
Setting Early Warning “Area
Mail”
<Area Mail setting>
Make the settings for receiving Area Mail.
1 Mail Setting screen (P.195) “Area Mail
setting”
“Area Mail setting screen”
appears.
2
Select any item:
Receive setting (default: No) …… Sets whether to
receive the Area Mail.
• The confirmation message asking whether to use
Area Mail appears before setting, read the given
notes carefully and select “YES”/“NO”.
Beep setting
Beep setting (default: ON) …… Turns the beep
ON/OFF.
Beep time (default: 10 seconds) …… Sets the
beep time between 01 and 30 seconds.
Receive entry …… Registers the name of Area Mail
other than the urgent news flash that you want to
receive and Message ID. Select “<Not recorded>” at
the “Receive entry screen”, and enter “Area Mail
name” and “Message ID” after you enter your
security code. The urgent news flash is sent
regardless of the settings of Receive entry.
N
z
If the storage capacity for Area Mails is full when you
receive an Area Mail, Area Mails are deleted from the
old Area Mails in the trash box, oldest read Area Mails,
and unread Area Mails.
N
z
The description screen or “Receive Area Mail” screen
may not appear when you receive the Area Mail
during using functions such as an i-
α
ppli or the
camera.
Area Mail setting