NTT docomo FOMA N705i, Instruction Manual

Page: 285 / 518

283
Data Disp
la
y/Edit/Mana
g
emen
t
Transferring all data at a time using
the Infrared data exchange
<Send/Receive all Ir data>
You can exchange all data at a time with other
devices using the Infrared data exchange function.
z
When you receive all, all the data on the FOMA
terminal is overwritten by the received data and
stored data are deleted including protected mails
and secret data of the phonebook or schedule.
However, frames and secret data in the secret
folder are not deleted. Check if there is an
important data before receiving all the data.
z
Transferring all may change the order of data on
the recipient.
●
Sending all data at a time
Select “Send all Ir data” from the function menu of
Data list screen or detail screen.
<Example: Send all data stored in the phonebook>
1 Phonebook list screen (P.79)
u
(FUNC) “Send all Ir data”
2 Enter your security code Enter
session number
“Session number”
→
P.281
3
Set the receiving device ready to
receive
4 Set the receiving device ready to
receive “YES”
Transmission of all data starts.
When the data is sent, a notification message
about completing the exchange appears.
■ To cancel sending all data
“NO”
■ To exit during sending
o
(Quit)
●
Receiving all data at a time
1 Receive Ir data screen (P.282)
“Receive all”
2 Enter your security code Enter
session number
“Session number”
→
P.281
3 Direct the Infrared data port toward the
other part’s device “YES”
■ To cancel receiving all Ir data
“NO”
4 Select “YES” when the overwrite
confirmation screen appears
■ To cancel receiving all Ir data
“NO”
5 Receive all data from other party’s
device
All the data reception starts.
When the received data is saved, a notification
message about completing the save appears.
■
To exit during the receiving
o
(Quit)
Forwarding Data with iC
Communication
<iC communication>
When transferring data using the iC
Communication
z
Place the FeliCa mark “
e
” on the FOMA terminal
(sender) over the FeliCa mark “
e
” on the FOMA
terminal (receiver).
z
Data transmission may not be smooth depending
on the FOMA terminal of the other party. Move
FOMA terminals so that the FeliCa marks “
e
” of
the sender and the receiver get close or distant, or
move them to the right, left, up and down.