NTT docomo FOMA N705i, Instruction Manual

Page: 324 / 518

322
O
ther Con
venient Functions
Resetting the total call time and total
call charges
<Reset total>
You can reset the Total calls duration or Total calls
charge displayed in the “Call data” to zero.
1
i
“SETTINGS” “Call time/Charge”
“Reset total” Enter your security
code Select any item:
Reset total duration …… Resets the accumulated
duration.
Reset total cost
……
Enters PIN2 code and resets
the accumulated charge.
PIN2 code
→
P.110
Resetting charges automatically
<Auto reset total cost>
You can set the FOMA terminal to reset the Total calls
cost displayed in “Call data” to zero automatically on
the 1st day every month, at 0:00.
1
i
“SETTINGS” “Call time/
Charge” “Auto reset total
cost” Enter your security code
2
“Auto reset” “ON” Enter PIN2 code
PIN2 code → P.110
■ Not to set Auto reset
“OFF”
Setting the Upper Limit of
Charge to Notify the Alarm
<Notice designate calls>
When accumulated charge displayed at “Call data”
exceeds the cost limit set in this function, you are
notified on the standby screen or with alarms.
z
The alarm notification works only once when the
accumulated charge exceeds the set cost limit.
z
Exceeding the limit does not prevent you from
making a call.
1
i
“SETTINGS” “Call time/Charge”
“Notice designate calls” Enter your
security code
2
Select any item:
Cost limit setting
……
Sets the cost limit between
10 and 100,000 by 10 units.
Notify setting
Notify cost limit
……
Specifies whether to
notify the cost limit.
Alarm tone …… Selects an alarm tone.
Volume …… Sets the alarm tone volume
with
c
.
3 Set the respective items
o
(Finish)
● Alarm notification actions
After ending a call, the function
notifies you with the following
methods when accumulated
charges exceed the cost limit.
■ When Notify cost limit is set
to “ON” and alarm tone is
set to other than “OFF”
When the accumulated charge exceeds the preset
cost limit, the alarm tone sounds for about 5 minutes
starting 3 seconds after finishing the call, and the
notification screen appears. To stop the alarm tone,
press any key. After the notification, pressing
t
or
y
displays “ ” (Notice designate calls) desktop
icon on the standby screen.
■ When Notify cost limit is set to “ON” and alarm
tone is set to “OFF”
When the accumulated charge exceeds the preset
cost limit, “
” (Call billing) desktop icon appears on
the standby screen.
●
Checking details of “ ” (Notice
designate calls)
The details of Notify cost limit is displayed by
selecting “
(Notice designate calls)” desktop icon
on the standby screen.
N
z
Setting Auto reset total cost to “ON” and changing the
month in “Set main time” resets the Total calls cost.
z
The Auto reset total cost is reset to “OFF” when:
• The FOMA terminal is turned on without the FOMA
card (UIM) inserted
•
t
is pressed on the PIN2 code input screen
which appears when the FOMA terminal is turned
on
• The PIN2 code is locked → P.110
• An error occurs on the FOMA card (UIM)
N
z
The charges for i-mode or packet communication, and
the charges for sending Chaku-moji are not included
in this function. To check i-mode communication
charges, see the “Mobile Phone User’s Guide [i-mode]
FOMA version” provided at the time of contract.
３／２８ １０：５０
￥３０００
Ｓｅｔ−ｕｐ ｃｏｓｔ ｌｉｍｉｔ
ｉｓ ｅｘｃｅｅｄｅｄ
Ｃｏｓｔ ｌｉｍｉｔ
Ｄａｔｅ